Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Danvers
Chimney repair in Danvers typically runs $350-$2,800 depending on whether you need mortar repointing, brick replacement, or a full rebuild, and our Chimney Repair team can usually inspect and quote within a few days of your call. We’ve been serving North Shore communities for over 42 years, and our Boston office dispatches crews to Danvers regularly - from the historic center-chimney colonials near Holten Street to the postwar ranches along Route 114. Call (857) 364-8219 and a live person will answer, 24 hours a day.
Danvers sits inland from Salem Harbor, which means it takes the full hit of North Shore nor’easters and hard freeze-thaw cycles every winter. That geography matters for your chimney. The soft, hand-made brick in 18th-century center-chimney homes spalls aggressively. Postwar ranches off Route 114 hide abandoned oil flues that were never capped or lined. We’ve seen both problems hundreds of times. Russell Haines built this company on documenting what we find, explaining it in plain English, and pricing it upfront - no surprises on the bill.
Why Hearthstone Chimney Co. Is Danvers’s Preferred Chimney Repair Company
We’ve worked on chimneys in Danvers long enough to know the difference between a Holten Street colonial built in 1750 and a 1962 ranch near the Peabody line. That local knowledge saves homeowners money. A tech who doesn’t recognize an unlined, hand-laid brick flue might recommend a full rebuild when HeatShield relining would solve it. We’ve made the opposite mistake too - assuming a modern clay liner exists where there’s nothing but soft mortar and 250 years of creosote.
Our Level-2 camera inspections end with photos you can see and a plain-English verdict. No jargon, no scare tactics. If the work can wait a season, we’ll say so. If it can’t, we’ll show you exactly why. The 90-Day Done Right Promise backs every job in writing - if it’s not right, we make it right, no paperwork and no arguing. Background-checked, uniformed technicians complete most repairs in a single visit. And the price we quote is the price on the invoice. A square deal.
Our Chimney Repair Services in Danvers
Mortar Repointing
The lime mortar in Danvers’s pre-1800 center-chimney homes was never meant to handle modern Portland cement. When we repoint a chimney near the town center, we match the original mortar composition - soft, breathable, compatible with hand-made brick. Hard cement repointing traps moisture and accelerates spalling. Done right, repointing with proper materials lasts decades. Done wrong, it destroys the brick it was meant to protect. A typical mortar repointing job in Danvers runs $1,200-$2,400 for a standard center chimney, depending on how many courses need work and whether scaffolding is required for height.
Spalling Brick Repair
Every spring after a hard Danvers winter, we get calls about brick faces flaking off center chimneys. The freeze-thaw cycle drives water into porous, hand-made brick, and the surface pops off in layers. Spalling brick repair in Danvers typically costs $800-$1,800 for localized replacement, or $2,200-$3,800 if multiple flues are involved and we need to rebuild sections of the stack. We source matching brick when possible and always address the water source - usually an open crown or failed cap - or the spalling returns.
Chimney Waterproofing
Water is what kills chimneys in Danvers. Not fire, not age - water. We apply professional-grade waterproofing to masonry chimneys after repair work is complete, using breathable siloxane-based sealers that let vapor escape while blocking liquid water. Waterproofing a typical Danvers chimney runs $350-$650. For historic center-chimney homes with large exposed surface area, it can reach $900-$1,200. We never waterproof over damaged mortar or active leaks. Fix first, seal second. That’s the order.
Flashing Repair
The junction where your chimney meets the roof is the most common leak point we find in Danvers, especially on postwar ranches with shallow-pitch roofs along Route 114. Step flashing corrodes, counterflashing separates, and water runs straight into the attic. Flashing repair in Danvers typically costs $450-$950. If the surrounding decking is rotted, we’ll document it with photos and quote the full repair before touching it. No surprises on the bill.
Chimney Rebuilding
Sometimes repointing isn’t enough. When a Danvers center chimney has deteriorated through multiple flue walls, or when a postwar chimney has shifted on its foundation, partial or full rebuilding is the only safe option. We rebuild with matching brick, proper liners, and crowns that shed water. A partial rebuild in Danvers runs $2,800-$5,500. Full rebuilds of large center chimneys can reach $8,000-$14,000. We always explore every alternative first. Rebuilding is the last resort, not the first suggestion.
Tuckpointing
For chimneys with sound mortar but deteriorated aesthetic joints, tuckpointing restores the clean, fine-line appearance of original masonry without the cost of full repointing. In Danvers’s historic districts, this matters for both function and appearance. Tuckpointing runs $900-$1,800 for a typical center chimney.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Danvers
We stock parts and materials from HeatShield, Gelco, and Olympia Chimney for Danvers jobs - no waiting on special orders, no substituting builder-grade products. HeatShield ceramic flue liner is what we installed in that Holten Street Federal where the unlined brick flue had no liner at all. Gelco caps and Famco dampers handle the salt air and freeze cycles better than hardware-store alternatives. When your chimney needs a repair, the materials matter as much as the labor. We don’t cut corners on either.
Common Chimney Repair Problems We See in Danvers Homes
- Unlined center-chimney flues hiding creosote in shared walls. Danvers’s pre-1800 colonials near Holten Street were built with no clay liner - just hand-laid brick and soft lime mortar. A standard brush-and-vacuum sweep never touches the interior wall where creosote glazes and mortar fails. Only a Level-2 camera inspection reveals what’s actually happening inside.
- Abandoned oil flues collecting moisture and animals in Route 114 ranches. When high-efficiency gas systems replaced oil boilers in the 1980s and 90s, many Danvers homeowners didn’t know the old flue was still open at the top. Uncapped, unlined, and often unknown to the current owner, these flues become water and wildlife highways.
- Freeze-thaw spalling on 18th-century brick. Danvers’s inland position exposes historic chimneys to harder freeze cycles than coastal Salem. Soft, porous, hand-made brick absorbs meltwater all winter, then the surface flakes off in spring. The damage looks sudden, but it’s been building for years.
- Open crowns and failed caps letting water into the stack. Every chimney in Danvers needs a crown that sheds water and a cap that keeps it out. We replace dozens each year where the original concrete crown has cracked or a cheap cap has blown off in a nor’easter.
Pricing for Chimney Repair in Danvers, MA
Here’s what chimney repair costs in the Danvers market, based on jobs we’ve completed in the last two years:
| Service | Typical Range in Danvers |
|---|---|
| Mortar repointing (standard center chimney) | $1,200 - $2,400 |
| Spalling brick repair (localized) | $800 - $1,800 |
| Spalling brick repair (multiple flues) | $2,200 - $3,800 |
| Chimney waterproofing | $350 - $650 |
| Waterproofing (large historic chimney) | $900 - $1,200 |
| Flashing repair | $450 - $950 |
| Partial chimney rebuild | $2,800 - $5,500 |
| Full center-chimney rebuild | $8,000 - $14,000 |
| Tuckpointing | $900 - $1,800 |
| HeatShield flue liner installation | $1,800 - $3,200 |
Three factors move these numbers: height and scaffolding requirements, the extent of hidden damage found during inspection, and whether matching historic brick needs to be sourced. We quote every job after a Level-2 camera inspection - photos you can see, a plain-English verdict, and a fixed price before we start. Estimates are free. Call (857) 364-8219.
Standing offers that apply: $50 off any repair over $250, free second opinion on any written estimate, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Danvers
Our crews work throughout the North Shore, including Chimney Repair in Danvers and neighboring Peabody, Middleton, Salem, and Topsfield. Same standards, same materials, same live person answering the phone. If you’re unsure whether you’re in our service area, call and we’ll tell you directly.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Danvers
No, not safely. An unlined brick flue does not meet modern code for solid-fuel appliances, and the soft lime mortar in pre-1800 chimneys allows creosote to soak directly into the walls where it can ignite. We can install a HeatShield ceramic flue liner or a stainless steel liner to bring your chimney into compliance without a full rebuild. Call (857) 364-8219 for an exact quote - estimates are free.
Every year, minimum. If you’re burning hardwood in an airtight stove as primary heat through a Danvers winter, inspect and sweep annually - and in some cases mid-season. We got a call from a center-chimney Federal off Holten Street where the homeowner had gone two winters without a sweep. Our tech pulled first-degree creosote flaking off the smoke chamber walls and found the exposed brick flue had no liner whatsoever. We ran a Level-2 inspection, brushed and vacuumed the firebox and damper, then installed a HeatShield flue liner to bring the shared brick flue back into service alongside the active fireplace. Call (857) 364-8219 to schedule - estimates are free.
It needs to be inspected, and likely capped or lined. Many postwar ranches off Route 114 and near the Danvers-Peabody line have abandoned oil flues that were left open when heating systems converted to gas. Uncapped, they collect debris, moisture, and animals. Sometimes they also leak carbon monoxide into wall cavities if the separation between flues has deteriorated. A Level-2 camera inspection will show exactly what condition it’s in. Call (857) 364-8219 - estimates are free.
Freeze-thaw cycling. Danvers sits inland enough to miss Salem’s coastal moderation, so your chimney takes the full force of North Shore winter. Water enters porous, hand-made brick, freezes, expands, and pops off the surface in layers. The damage appears in spring but accumulates all winter. The cure is addressing water entry - repointing open joints, rebuilding the crown, installing a proper cap - then replacing spalled brick with matching material. Call (857) 364-8219 for an inspection - estimates are free.
No. Third-degree creosote - the hard, tar-like glaze that forms in unlined or poorly drafted flues - looks like shiny black glass and cannot be identified by looking up from the firebox or down from the roof. It requires a Level-2 camera inspection to locate and assess. In Danvers’s unlined center-chimney homes, it often forms on the interior walls of shared flues where no brush can reach. We document everything with photos and give you a plain-English verdict. Call (857) 364-8219 - estimates are free.
Ready to get your chimney inspected? Call (857) 364-8219 now. A live person will answer, 24 hours a day, and we’ll schedule your free estimate at a time that works for you. Most repairs are completed in a single visit. The price we quote is the price you pay. Done right - and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Danvers and local communities for over 42 years.