Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Danvers
Chimney liner replacement and rebuild work in Danvers typically runs $2,800-$8,500 depending on whether we’re dropping a stainless liner into an existing flue or rebuilding a center-chimney mass from the roofline up. Most liner jobs in Danvers are completed in a single visit, with full rebuilds taking two to three days when weather allows. Call us at (857) 364-8219 to book a Level 2 camera inspection and get an upfront price before any work begins.
We’ve been driving to Danvers for over 42 years, and we know the difference between a Route 114 ranch with an abandoned oil flue and a pre-1800 colonial off Holten Street with a shared center chimney built from hand-laid brick. That distinction matters because the repair approach, the materials, and the price are entirely different. Our crews are background-checked and uniformed, and we carry DuraFlex and Olympia Chimney liners on our trucks so we’re not ordering parts after we arrive.
Why Hearthstone Chimney Co. Is Danvers’s Preferred Chimney Liner & Rebuild Company
Danvers homeowners call us because we document what we find and explain it in plain English before we quote a price. Our Level 2 camera inspections end with photos you can see on the screen and a written verdict, not a vague recommendation. The 90-Day Done Right Promise covers every liner and rebuild job we do in Danvers - in writing, no arguing, no paperwork to chase down.
We answer the phone with a live person 24 hours a day, 7 days a week. Not a voicemail. Not a callback queue. If you’re on Holten Street wondering whether that cracked crown from last winter’s nor’easter has gotten into your flue wall, you’ll talk to someone who can get a technician scheduled.
Our Boston office coordinates dispatch to Danvers, and our crews carry the professional-grade materials we need for most jobs: DuraFlex stainless liners, HeatShield cerfractory flue sealant, Gelco caps, and Olympia Chimney components. No builder-grade substitutes. No waiting on a parts order.
Our Chimney Liner & Rebuild Services in Danvers
Stainless Steel Liner Installation
A stainless steel liner is the right fix for most Danvers chimneys where the clay tile is cracked or missing entirely. We install insulated 316Ti stainless liners from DuraFlex and Olympia Chimney, sized to your appliance - wood stove, fireplace insert, or boiler - and capped to keep water and animals out. In the postwar ranches off Route 114, we regularly find the original clay flue was sized for an oil boiler and is too large for a modern gas unit; a properly sized liner fixes the draft and stops condensation from rotting the flue from the inside.
Flexible Liner for Offset Flues
Some of Danvers’s oldest homes have flues with offsets or bends that a rigid liner won’t navigate. We use DuraFlex flexible liners for these jobs, pulled through the existing flue path without dismantling the chimney. This matters in center-chimney colonials where the flue was never straight to begin with. The flexible liner still carries the same insulation and warranty as rigid, and we seal the top with a Gelco or Famco cap sized to the new diameter.
Liner Replacement
When a liner has reached the end of its service life - cracked clay, corroded stainless, or a failed HeatShield coating - we remove and replace it. For Danvers homeowners with wood stoves burning as primary heat, this is critical. Rural properties around Danvers load their flues far heavier than occasional fireplace users. First-degree creosote becomes third-degree glaze faster than most owners realize, and a compromised liner in that environment is a chimney fire waiting to happen. We replace the liner, inspect the surrounding masonry, and tell you honestly whether the flue walls can support another decade or need a partial rebuild.
Partial Rebuild
A partial rebuild addresses the section of chimney that has failed - usually the crown, the top courses of brick, and the flue opening - without tearing down the whole structure. In Danvers, this is common after hard winters. The inland freeze-thaw cycling, worse than what Salem gets closer to the harbor, spalls soft hand-made brick and opens mortar joints. Water gets in, freezes, expands, and pushes the face off the brick. We rebuild with matching brick where possible, pour a new concrete crown with proper overhang and drip edge, and install a liner suited to the appliance below. Our Chimney Liner & Rebuild team carries the masonry materials to complete most partial rebuilds in one visit.
Full Chimney Rebuild
When a center-chimney colonial has deteriorated past the point of partial repair - multiple flue walls compromised, smoke chamber eroded, foundation settlement visible - we rebuild from the roofline up or from the ground up, depending on the scope. This is rare but necessary work, and we don’t recommend it unless the camera evidence shows it’s the only honest fix. Every full rebuild we do in Danvers gets a new liner system, a poured crown, and a cap, with photos at every stage and a final inspection before we sign off.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Danvers
We work exclusively with professional-grade materials: DuraFlex and Olympia Chimney for stainless and flexible liners, HeatShield for cerfractory flue resurfacing, Gelco and Famco for caps and dampers, and Copperfield for specialty flashing and sealants. We stock the common liner diameters and cap sizes our Danvers customers need, so we’re not waiting on a warehouse. When we quote a job, the brand and model are specified in writing. No substitutions without your approval.
Common Chimney Liner & Rebuild Problems We See in Danvers Homes
- Wood stove flues loaded with glazed creosote. Rural Danvers properties burning wood as primary heat often miss the first-degree stage entirely. By the time they call, the creosote is a brush-resistant glaze that requires chemical treatment and often reveals a cracked or missing liner underneath. We inspect first, then clean, then quote replacement if the flue wall is compromised.
- Abandoned oil flues beside active gas flues. In the ranch neighborhoods off Route 114 and near the Danvers-Peabody line, we find uncapped, unlined clay-tile or bare-brick flues that were left in place when oil boilers were swapped for high-efficiency gas. These collect debris, moisture, and animals, and they often vent into the same chimney mass as the active flue. We cap or line them properly, or remove them if the chimney structure allows.
- Freeze-thaw spalling on pre-1800 brick. Danvers’s inland location means harder freeze-thaw cycles than coastal Salem. The soft, hand-made brick in center-chimney colonials absorbs water, freezes, and spalls. We see this every spring on crowns and exposed flue walls. A partial rebuild with proper waterproofing and a new liner stops the cycle.
- Shared multi-flue deterioration hidden from standard sweeping. Center-chimney designs with three or four flues in one mass can fail between flues where a sweep brush never reaches. Our Level 2 camera inspection finds these gaps. Without it, you’re guessing at the condition of walls you can’t see.
Pricing for Chimney Liner & Rebuild in Danvers, MA
Here is what liner and rebuild work costs in the Danvers market, based on jobs we’ve completed in the past two years:
| Service | Typical Range in Danvers |
|---|---|
| Stainless steel liner installation (straight flue, single appliance) | $2,800 - $4,200 |
| Flexible liner with offsets or bends | $3,200 - $4,800 |
| Liner replacement (remove old, install new) | $3,500 - $5,500 |
| Partial rebuild (crown + top courses + liner) | $4,500 - $7,500 |
| Full chimney rebuild from roofline up | $6,500 - $12,000+ |
What moves the price: flue height, number of appliances being vented, whether the existing liner can be removed or is fused in place, masonry access, and whether the smoke chamber needs parging. We give you one number before we start, and that is the number on the invoice. No surprises. Estimates are free, and we bring the camera to every appointment so you see what we see.
We Also Serve Cities Near Danvers
Our crews work throughout the North Shore. If you’re in Peabody, Middleton, Salem, or Topsfield, we cover your area with the same upfront pricing and live-answer scheduling. We also provide Chimney Liner & Rebuild in Danvers and surrounding communities with no change in service standard.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Danvers
A wood stove used as primary heat in Danvers needs sweeping every 1-2 cords burned, which for most rural properties means once per season at minimum. A decorative fireplace burning a few weekends a year can go 2-3 years. The difference is creosote volume: a stove running daily loads the flue 10-20 times faster than occasional fireplace use. Call (857) 364-8219 and we’ll schedule a Level 2 inspection to check your liner condition while we sweep.
Yes, or it needs a proper cap and seal at minimum. An abandoned flue without a liner collects moisture, debris, and animals, and it can vent into the chimney mass shared with your active gas flue. We inspect both flues with a camera, then quote either a liner and cap for the abandoned flue or its safe removal if the structure allows. Call us for an exact quote - estimates are free.
Your chimney was built as a single masonry mass with multiple flues sharing walls of hand-laid brick and soft lime mortar. There is often no clay liner at all, and the flue walls deteriorate together, not separately. We inspect the entire mass with a camera, reading mortar and flue condition as one system, then rebuild or line accordingly. Modern components installed without understanding this context fail early. We were called to a center-chimney colonial off Holten Street where the wood stove had been pushing hard all winter and the flue was loaded with glazed third-degree creosote. We ran a Level 2 inspection, found the original brick flue had no liner and the smoke chamber was stepped and rough, then rebuilt the flue path and installed an insulated stainless liner with a proper cap and crown repair. The owner could finally burn without the draft stalling and the stove stopped smoking back into the room.
Yes. Danvers sits inland from Salem Harbor and takes the full freeze-thaw cycle of North Shore winters. Water enters cracks in the crown, freezes overnight, and pushes off the face of soft hand-made brick. The flaking you see is spalling, and it accelerates every spring until the crown is repaired and the flue is protected. A partial rebuild with a poured crown and proper overhang stops the damage. Call (857) 364-8219 for a camera inspection and written quote.
We can, and we will not recommend replacement without camera evidence you can see for yourself. Cracked clay tile in one spot can sometimes be addressed with a HeatShield cerfractory seal. Multiple cracks, shifting, or gaps between flue sections mean replacement. Our Level 2 inspection gives you the photos and a plain-English verdict so you decide from fact, not pressure. Call (857) 364-8219 to schedule - estimates are free, and the camera inspection is included.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Danvers and the North Shore since 1984.